Extron SW2 VGArs Audio & VGA Switcher driver for Windows 7 - Extron SW2 VGArs Audio & VGA Switcher driver from

Extron SW2 VGArs Audio & VGA Switcher 2.02

Extron SW2 VGArs Audio & VGA Switcher driver from Extron for OS Independent

Extron SW2 VGArs Audio & VGA Switcher driver from Extron for OS Independent

Publisher review for Extron SW2 VGArs Audio & VGA Switcher 2.02:

Before install Extron SW2 VGArs Audio & VGA Switcher 2.02you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Extron SW2 VGArs Audio & VGA Switcher . We recommend to always use most recent version of a driver.

This package provides the necessary installation files of Extron SW2 VGArs Audio & VGA Switcher firmware 2.02.Fixes:- Increased Contact Closure Switching Speed. The contact closure switching speed has been increased to ensure compatibility with rotary switch devices.
- Added Executive Mode (Front Panel Lockout).The front panel buttons can be locked out to prevent unauthorized input changes.
Installation steps:To load a new version of firmware to your SW VGA Ars switcher, call the Firmware Loader software from within the Universal Switcher Control Program. Your computer’s serial port must be connected to the switcher’s serial port.

1. In the Universal Switcher Control Program, click the Firmware Loader button.
2. If you have not updated firmware for the SW VGA switcher before, on the Add Device screen, select the RS-232 tab. If you have updated firmware for this model, click Cancel. The Firmware Loader window appears. Proceed to step 5.
3. From the drop-down menus on the RS-232 screen, select the appropriate Com port number (obtained from your system administrator) and baud rate (the default is 9600).
4. Click OK. The Firmware Loader window appears.
5. Select the SW VGArs and click File > Open. The Choose Firmware File screen appears.
6. Navigate to and select the new firmware file. The Choose Firmware File window closes.
7. In the Firmware Loader window, click Begin. The Total Progress and Progress status bars show the progress of the upload. The firmware upload to the switcher may take several minutes. Once the status bars have progressed from 0% to 100%, and Status is listed as Complete, the firmware loader utility resets the switcher.
8. Click Exit to close the Firmware Loader. 

Operating system:
OS Independent